Aluminum Welding Aluminum Soldering & Aluminum Brazing With Dura Fix Rod

aluminum Welding aluminum brazing aluminum soldering aluminum repair Weeks Distributors 36 Carolina St. Taylors, South Carolina 29687-2063
E-mail aluminum welding For Information Or Ordering Call 800-547-weld (9353) 24 Hr Live Operator (For Orders Only) 800-380-3752 Fax: 864-322-9669
aluminum welding  Now you can repair aluminum and zinc based parts such as this with out a welding machine.
  • All you need is a hand held propane type torch for small pieces.

  • Produces a sound joint that is stronger than the parent metal.

  • No fluxes are required.

  • There are no fumes.

  • Low 732°F. working temperature.
Click Here  To order this Space-Age Product with our Secure Online International Order Form

Use DURA-FIX For : INDUSTRIAL MAINTAINANCE - FABRICATE
REPAIR - MAINTAIN - ALUMINUM AND AL LOY

BOAT OWNERS
ARTISTS
HOBBYISTS
RADIATOR SHOPS
VOCATIONAL SCHOOLS
RACE CAR MECHANICS
LOCKSMITHS
GO-CART RACERS
CAMPING ENTHUSIASTS		 PLUMBERS
WELDERS
FARMERS
FISHERMEN
HUNTERS
GUNSMITHS
AVIATORS
SPORTSMEN
MACHINISTS		 AIR CONDITIONER REPAIRMEN
LAWNMOWER REPAIR SHOPS
TRANSMISSION REPAIRMEN
MOTORCYCLE REPAIRMEN
AUTO-BODY REPAIRMEN
MAINTENENCE MECHANICS
STORM WINDOW FABRICATORS
SOLAR ENERGY FARICATORS
ANTIQUE CAR RESTORATION 

FEATURES:
*LOW COST *STRONGER THAN ALUMINUM *NO FLUXES OR FUMES *LOW WORKING TEMPERATURE

Aluminum Welding Instructions

  If you have any problems with DuraFix or any questions, do not hesitate to call us at 800-547-9353. We will give you personal instructions on how to use our product.
  Customers that call us with problems leave very satisfied and usually order again.
100%Clean area to be welded down to base. Brush the base with stainless steel brush till shiny. Heat the area to be welded, evenly. As you heat the base, rub the rod vigorously against the heated piece to be welded till rod flows. Never apply heat directly to rod.
ALWAYS WEAR SAFETY GLASSES AND GLOVES
Do not use on magnesium. If you are unsure of the the material, file off some metal and apply the torch. Magnesium will burn white like a flare.
aluminum welding rods
WEEKS DISTRIBUTORS
Will not be held liable for any damages, injury or losses due to the misapplication of this product or any other reason whatsoever.

NOW WELDING ALUMINUM IS AS EASY AS 1 - 2 - 3
     

HOW TO WELD ZINC BASED METALS WITH DURAFIX ROD
Vee the broken edges to about 45 degrees, clean the surface of any plating or scale back from edges of the vee 1/8 of an inch.
 
 
Heat until it starts to flow. Turn flame paralell to surface and with side of flame, hold at this heat. Heat welding rod to same temperature. Now with both bases and welding rod at this temperature, touch rod to the break and rod will flow into vee, thoroughly fusing the parts. 
Repeat operation until break is completely filled. Be sure to kick rod into weld to break down skin resistance as filler rod will lay on surface and will not fuse if only heat is applied.
 

HOW TO BRAZE ALUMINUM WITH DURAFIX ROD
Brush surface to be repaired thoroughly under heat to break up surface oxide.
 
 
Heat the parts hot enough to flow without the aid of the flame, thoroughly tinning the surface.
 
Brush Tinned surface under heat, thoroughly filling the open pores.
 
 
With sides thoroughly tinned, flow in enough rod to fill the Vee. Be sure filler fuses with the tinned surface without melting the base metal. 

HOW TO REPAIR A PROPELLER
Wire brush throughly to break up surface oxide and remove paint.
 
Heat hot enough to flow rod without the aid of the flame. Tin the flat (not beveled) side and attach a temporary support of carbon or copper. 
Turn and tin beveled side, building out the blade slightly larger than its original size. Grind damaged edges to a 45 bevel. Pitch propeller to standards. 
Let cool, then grind to proper standards. Results? ... a well prepared wheel without porosity for you to balance and paint!
CLICK HERE TO PRINT A BROCHURE FROM THIS WEB PAGE
Dura-FIX Rod

The most widely used rod on the market for WELDING ZINC BASE metals - white - die cast - pot metal. Alloyed from pure virgin metals. Welds made with ROD are clean and free from slag. Produces a sound joint that is stronger than the parent metal. BRAZING ALUMINUM without the use of flux, sound and free from porosity. SOLDERS GALVANIZED, also used as a RUB-ON solder. Use a slightly carburizing flame (excess of acetylene), with small tip for most work. MELTING POINT 732°F.

Dura-Fix Is Used TO: Repair Kirksite dies, power tools, aluminum radiators, power mower castings, propellers, lower units and boat hulls. THOUSANDS OF OTHER USES.
Specifications
Tensile Strength,lbs/sq. in.
Compression Strength,lbs/sq. in.
Shear Strength,lbs/sq. in.
Charpy Impact Str,lbs/sq. in.
Hardness (Brinell)
Ductility Good
Melting Point
Specific Gravity
Density (Ibs/cu. in.)
Elongation (in 2")
Coefficient of Linear Expansion
Electrical Conductivity 
Thermal Conductivity		 47,000
60,000 - 75,000
34,000
4 ft/lb to break 1/4" bar
100
Good
732°F
6.7
0.25
3%
15.4x10-6/°F
24.9% of Cu
0.24 cal/cu. cm/°C
General Notes

This rod will work with propane, mapp, butane, oxyacetylene or any fuel source as long as the material is brought up to 732°F. The rod will not work if heated directly. You must heat the material that you are working on to 732°F and then apply the rod. The material must be cleaned with a stainless steel brush (included) because the rod will not adhere to stainless steel. The rod will not adhere to the material being brazed if it is cleaned with a steel or other type brush.


Welding, Repair, Mechanical & Boating Links:

Hurricane Harbor Yacht Club


Yetman's Shop Tools
Boating News.Com

Hurricane Harbor Affiliates

Electro-Machinery & Electronics Welding Site

All Things AutomotiveAll Things Automotive and Aluminium

John's Nautical Boat Repair Links

Bob Pone's Marine DIY Page

Neil's Ford 9n, 2n & 8n Farm Tractor Restoring Page

Hearn Marine from Bow to Stearn

Nissan Marine

Kendall Motor Oil

The Harley Davidson Motorcycles Home Page

Aluminum Boat Trailers

Small Tractor FAQ

The Fishing Page

Gaskets, Repair and Restoration Supplies for Antique and Classic Outboard Motors

Parts for Yamaha, Evinride, Mercury, Johnson & OMC Outboard Motors

Onwater.com Everthing About Boats

Smallships.com All About Boats & Boating

Yetman's Lawn & Garden Power Equipment Directory Shop Tools for Aluminium

Edoc Ypocew 's tutorial on welding pot metal and white metal

Specialty Equipment Market Association (SEMA.org) directory of aftermarket company products and services

Source of Aluminum Tubing in 6063 T832 alloy & 6061 T6 aloy

Alum-Alloy Aluminum alumiweld Castings

RE: Powerboat Reports Magazine

Re: Practical Sailor Magazine

Ham Radio Station W5UN

Alan's RC Links

Auto Tool Links

Welding Links

Refrigerator Repairs

Solid State Amplifier Project

Charles MacDonald's Auto Links

Repairing GSL-SE oil cooler

Dallas Truck Show

Fishing Links

Manufacturing Engineering Maintenance Links

Nautique Net

METAL

Old Car Finders

Lycos

The Aluminum Reapir Board

New Durafix Camp Saws









All original, contents, graphics, layout, design, text and information on this web site is copyrighted and provided on behalf of the advertiser. Under no conditions does it constitute professional advice or endorsement of the product. No representations are made in relation to the product or the completeness, accuracy, comprehensiveness or otherwise of the information provided.
aluminum welding aluminum soldering aluminum brazing aluminum repair. Aluminum Welding ALUMINUM ALUMINIUM ALUMINUM WELDING Aluminum Solder. ALUMINUM BRAZING, aluminium brazing. Welding Aluminium soldering Brazing SOLDERING,crack aluminium aluminium welding. Cracked engine. aluminum castings leak aluminum boats weld rod pot boats zinc boat die cast aluma propane how to torch how to weld repair fabrication metal boat aluminum alloys coil shop radiator aluma. 8n ford irrigation tubing air farm white metal marine. outboard cooling fishing heating 2n 9n conditioner. hvac transmission alumi motorcycle alumiweld edoc ypocew stainless steel.